- Amazingly Lightweight – 5.145 ~ 5.500 Kg (depends on setup)
- Narrow Frame Design 40MM (one piece frames)
- Enhanced Reliability
- Long Term Maintence Intervals
- True Running Clutch Bell
- Using Zenoah Clutch System
- On Board Generator Compatible
- Adjustable Gear Ratio [6.47 – 7]
- Fuel Tank Up to 12oz
- Perfect CG
- Direct Servo Drive
- Full Carbon Fiber Parts
- Adjustable Canopy Mounts
- Compatible with Zenoah 23cc~30cc RC Format Engines
- Forward Engine Mount – Exhaust at the left side
- Standard M3 Hex screws
- High Levels of Air frame Rigidity
After the Success of our G700Z Conversion KIT for TREX 700N we we are happy to announce you the upcoming Gasser Conversion KIT.. The G700XZ!
G700XZ Gasser uses parts from Align TREX 700X DOMINATOR.
Building Thread by Carey Shurley : https://www.helifreak.com/showthread.php?t=808244
Includes :
- C/F Main Frames
- C/F Engine Master Mount
- C/F Bottom Frame Mount
- C/F Engine Heat Deflector
- C/F Governor Magnetic Sensor Mount
- C/F Electronics mounts Set
- C/F on Board Generator Mount
- Clutch Bell
- Hardware
Parts Needed.
For TREX 700X Owners :
- 1 X TREX 700X KIT (as donor)
- 1 X H70B015XXT (700X Frame Mounting Block)
- 1 X H70B019XXT (700X Frame Mounting Bolt)
- 1 X H70B017XXT (700X The 3rd Main Shaft Bearing Block)
- 1 X H55G003XXT (Motor Pinion Helical Gear 16T)
- 1 X HN6062T (Plastic Servo Nut)
- 1 X Fuel Tank with stopper for Gas fuel & fuel lines
- 2 X Ball & Plastic Ball Links for Throttle Servo
- Zenoah RC Style Gas Engine
- Muffler
- Electronics
- Radio
For TREX 700XN Owners :
- 1 X TREX 700XN KIT (as donor)
- 1 X HC7655 700X Painted Canopy
- 1 X H70B015XXT (700X Frame Mounting Block)
- 1 X H70B019XXT (700X Frame Mounting Bolt)
- 2 X H70B017XXT (700X The 3rd Main Shaft Bearing Block)
- 1 X H70B020XXT (700X Motor Pinion Gear Bearing Mount)
- 1 X H55G003XXT (Motor Pinion Helical Gear 16T)
- 1 X Main Gear (112T – H70G002AXT for Gear Ratio :7) or (110T – H70G008AXT for Gear Ratio : 6.87)
- 1 X HN6062T (Plastic Servo Nut)
- 1 X Fuel Tank with stopper for Gas fuel & fuel lines
- 2 X Ball & Plastic Ball Links for Throttle Servo
- Zenoah RC Style Gas Engine (TRM Recommended)
- Muffler
- Electronics
- Radio
If you don’t have a donor TREX 700X KIT :
Frame Assembly
- 2 X H70B015XXT (700X Frame Mounting Block)
- 2 X H70B019XXT (700X Frame Mounting Bolt)
- 2 X H70B017XXT (700X The 3rd Main Shaft Bearing Block)
- 1 X H55G003XXT (Motor Pinion Helical Gear 16T)
- 1 X HN6062T (Plastic Servo Nut)
- 2 X Ball & Plastic Ball Links for Throttle Servo
- 1 X Fuel Tank with stopper for Gas fuel & fuel lines
- 1 X H70B009XXT (700X Servo Mount Set)
- 1 X H70B010XXT (700X Canopy Support Set)
- 1 X H70B011XXT (700X Canopy Mounting Bolt)
- 1 X H70B016XXT (700X Main Shaft Bearing Block)
- 1 X H70B020XXT (700X Motor Pinion Gear Bearing Mount)
- 1 X H70B018XXT (700X Anti Rotation Bracket)
- 1 X H70G012XXT (102T M1 Helical Autorotation Tail Drive Gear Set)
- 1 X H70G008AXT or H70G002AXT (Slant Thread Main Drive Gear)
- 1 X H7NG003XX (One-way Bearing Housing)
- 1 X H7NG004XXT (One-way Bearing FE-423Z)
- 1 X HN7018T (One Way Bearing Shaft)
- 1 X HC7655 (700X Painted Canopy)
- 1 X H70F001XAT (700X Landing Skid Black)
- 1 X HN7049QFT (Skid Pipe Silver)
Main Rotor Assembly
- 1 X H70093AT (700DFC Main Shaft)
- 1 X H70121T (700DFC Linkage Ball Assembly)
- 1 X H70H004AXT (700X FL Designed Main Rotor Housing Set)
- 1 X HN7116T (700 New Main Rotor Holder)
- 1 X H70H006XXT (700FL Main Rotor Holder Arm)
- 1 X H70H010XXT (700X Control Arm Set)
- 1 X H70H005XXT (700 CCPM Metal Swashplate)
- 1 X H70Z007AXT (700X Counter Thread Main Linkage Rod Set)
Tail Assembly
- 1 X H70T010XXT (700X Tail Boom Mount Set)
- 1 X H70G001NXT (M1 Torque Tube Front Drive Gear Set 23T)
- 1 X H70073AT (700 Carbon Tail Control Rod Assembly)
- 1 X H70074T (Tail Control Guide)
- 1 X H70T005XXT (700 Carbon Fiber Tail Boom Matte Black)
- 1 X HN7056T (Torque Tube)
- 1 X HN7055AT (Tail Boom Brace)
- 1 X HN7041T (Metal Stabilizer Belt Set)
- 1 X HN7029T (Carbon Stabilizer/2.0mm)
- 1 X HN7042BT (700 Torque Tube Rear Drive Gear Set)
- 1 X HN7109T (Metal Vertical Stabilizer Mount)
- 1 X Tail Rotor Unit
- Zenoah RC Style Gas Engine
- Muffler
- Electronics
- Radio
Recommended Upgrade.
- Lightweight Metal Carb Arm (threaded for either 2mm or 3mm threaded ball)
You Can find it by contacting directly Mr Doug Darby on Facebook.
Additional Information
KIT Options | Without C/F Engine Cover, With C/F Engine Cover |
---|
Only logged in customers who have purchased this product may leave a review.
Related Products
TB70|G
A Great Design of a Gasser Conversion KIT for the Brand NEW Align TB70 Heli.
Premium Air Filter [Gasser Engines]
High-End 2-Stage Air Filter with Malossi Filter Foam.
Fits to any 30-60CC Gasser Engine.
FREE SHIPPING WorldWide!
Carbon Fiber Engine Cover [Zenoah RC]
20 ~ 40 Grams weight.
100% Carbon Fiber
CNC Drilling & Cutting Finishing
N700X NITRO EXTREME UPGRADE KIT [TREX 700XN]
Up-Grade Conversion KIT for TREX 700XN Heli.
EXTREME Version.
On Demand Production.
N700X NITRO Standard UPGRADE KIT [TREX 700XN]
Up-Grade Conversion KIT for TREX 700XN Heli.
Standard Version.
On Demand Production.
T700X TURBINE Conversion KIT [TREX 700X/XN]
High-End TURBINE Conversion KIT for TREX 700X & TREX 700XN Helis.
Especially Designed for XICOY X45H Turbine Engine.
On Demand Production.
G760XZ Gasser Conversion KIT [TREX 700X/XN]
Special Gasser Conversion KIT for TREX 700X, 760X & 700XN Helis.
G696Z Gasser Conversion KIT [SYNERGY 696]
Gasser Conversion KIT for SYNERGY 696 Heli.
On Demand Production – Customizations Available.
C/F Cooling Fan Shroud for TREX 700N & TREX 700XN
Ultra Lightweight ~40 Grams weight.
High Gloss Full Carbon Fiber.
Hand Made on Demand Production.
Reviews
There are no reviews yet.