High-End Turbine Conversion Kit Designed for XL-POWER SPECTER 700N.

Turbine Engines are Hot.. Air-Frames Must be Hotter.. 😉

• Designed for SPECTER 700 Nitro Helicopter
• Reverse Facing Turbine Mount Design
• Unique Custom-Made Side Fuel Tanks with 7075-T6 Billet Metal Mounts, Clear Windows & Nylon Plastic Covers (2X500ml – 1L of Total Fuel Capacity)
• Fuel Tanks Ready with Plumbing and Pick Up Clunks Installed
• Sullivan Pro FLEX Fuel lines inside the Tanks
• Festo QSMLV-M5-4-I Fittings
• High Quality Carbon Fiber Frames
• 7075-T6 2nd Stage Bearing Blocks with 4 Ball Bearings Shaft Support
• 7075-T6 Billet Cooling Fan Shroud
• 1st Stage 1:1 Ratio XL Series Belt Driven Design with 7075-T6 30T Bell & Secondary Pulleys
• 2nd Stage 106T Main Gear & 13T Pinion
• Gear Ratio 8.15
• Optional Gear Ratio 9 Using 109T Main & 12T Pinion
• New Engine Master Mounts 7075-T6
• Hybrid Rear Engine Mounts 7075-T6 & Carbon Fiber
• Direct Drive Tail Servo – Repositioned Under the Tail Boom
• Custom Frame Spacers
• Special Design for Tidy Accommodation of the Fuel Pump, Electronics & Turbine Accessories
• FTC UAT Air Trap 100ML dedicated mount at the Nose of the Frame
• No Extra (XL-POWER) Spare Parts needed, there are All Included
• No Canopy Trimming is needed

– Both XICOY & TS/WREN Turbine Engines Supported –

Extra Parts Needed.

• 1 X SPECTER 700 Nitro KIT [as a donor]
• FTC UAT Air Trap 100ML

Owner’s Manual

Download Blackout Mods Turbine Conversion PDF File