Extra Parts Needed.

For TREX 700X or 760X Owners:

• 1 X TREX 700X KIT (as donor)
• 1 X H55G003XXT (Motor Pinion Helical Gear 16T)
• Zenoah RC Style Gas Engine (TRM OR OBR/GPH)
• Muffler (MStudio)
• Electronics
• Radio

For TREX 700XN Owners :

• 1 X TREX 700XN KIT (as donor)
• 1 X H70B020XXT (700X Motor Pinion Gear Bearing Mount)
• 1 X H55G003XXT (Motor Pinion Helical Gear 16T)
• 1 X Main Gear (112T – H70G002AXT for Gear Ratio :7) or (110T – H70G008AXT for Gear Ratio : 6.87)
• Zenoah RC Style Gas Engine (TRM OR OBR/GPH)
• Muffler (MStudio)
• Electronics
• Radio

No Donor TREX KIT (Spare Parts Collect) :

Frame Assembly

• 1 X H70B015XXT (700X Frame Mounting Block)
• 1 X H55G003XXT (Motor Pinion Helical Gear 16T)
• 1 X H70B009XXT (700X Servo Mount Set)
• 1 X H70B010XXT (700X Canopy Support Set)
• 1 X H70B011XXT (700X Canopy Mounting Bolt)
• 1 X H70B020XXT (700X Motor Pinion Gear Bearing Mount)
• 1 X H70B018XXT (700X Anti Rotation Bracket)
• 1 X H70G012XXT (102T M1 Helical Autorotation Tail Drive Gear Set)
• 1 X H70G008AXT or H70G002AXT (Slant Thread Main Drive Gear)
• 1 X H7NG003XX (One-way Bearing Housing)
• 1 X H7NG004XXT (One-way Bearing FE-423Z)
• 1 X HN7018T (One Way Bearing Shaft)
• 1 X Canopy
• 1 X H70F001XAT (700X Landing Skid Black)
• 1 X HN7049QFT (Skid Pipe Silver)

Main Rotor Assembly

• 1 X H70093AT (700DFC Main Shaft)
• 1 X H70121T (700DFC Linkage Ball Assembly)
• 1 X H70H004AXT (700X FL Designed Main Rotor Housing Set)
• 1 X HN7116T (700 New Main Rotor Holder)
• 1 X H70H006XXT (700FL Main Rotor Holder Arm)
• 1 X H70H010XXT (700X Control Arm Set)
• 1 X H70H005XXT (700 CCPM Metal Swashplate)
• 1 X H70Z007AXT (700X Counter Thread Main Linkage Rod Set)

Tail Assembly

• 1 X 700 or 760 Tail Boom Mount Set
• 1 X H70G001NXT (M1 Torque Tube Front Drive Gear Set 23T)
• 1 X Carbon Tail Control Rod Assembly)
• 1 X Tail Control Guide)
• 1 X Carbon Fiber Tail Boom Matte Black)
• 1 X Torque Tube)
• 1 X HN7055AT (Tail Boom Brace)
• 1 X HN7041T (Metal Stabilizer Set)
• 1 X HN7029T (Carbon Stabilizer/2.0mm)
• 1 X HN7042BT (700 Torque Tube Rear Drive Gear Set)
• 1 X HN7109T (Metal Vertical Stabilizer Mount)
• 1 X Tail Rotor Unit

• Zenoah RC Style Gas Engine (TRM OR OBR/GPH)
• Muffler (MStudio)
• Electronics
• Radio

Recommended Upgrade.

• Lightweight Metal Carb Arm (threaded for either 2mm or 3mm threaded ball)

You Can find it by contacting directly Mr Doug Darby on Facebook.

Please Note that this is NOT a Complete Gasser Helicopter Kit!
If you dont Have a donor Heli and you want a complete Gasser Heli kit please check this out:

G760XZ [Complete Gasser Heli KIT]