- My cart
- No products in the cart.
- Enhanced Reliability
- One Piece Main Frames
- Long Term Maintence Intervals
- Minimum Extra Spare Parts
- Only SYNERGY Parts needed
- One Piece True Running Clutch Bell
- Special BLACKOUT Pinion Gear 20T
- Gear Ratio 6.95
- Uses Zenoah Clutch System
- On Board Generator Compatible
- Adjustable Gear Mesh & Gear Ratio
- Fuel Tank Capacity Up to 20 oz
- Perfect CG
- Full Carbon Fiber Parts
- Compatible with Zenoah 23cc~31cc RC Format Engines
- Forward Engine Mount – Exhaust at the left side
- High Levels of Air frame Rigidity
- Little Canopy trimming needed
- C/F Main Frames
- C/F Engine Master Mount
- C/F Bottom Frame Mount
- C/F Engine Heat Deflector
- C/F Governor Magnetic Sensor Mount
- C/F on Board Generator Mount
- Clutch Bell
- Pinion Gear [20T]
- 6X19X6 Flanged Bearing
- 6X15X5 Bearing
Extra Parts Needed.
- 1 X SYNERGY N7 KIT (as a donor model)
- 2 X Landing Gear Mount (310-112)
- 2 X Frame Spacer E6/7 Set (310-110)
- 1 X Bearing Block (310-152 for 6X15X5 Bearing) OR (310-151 for 6X19X6 Flanged Bearing)
- 1 X Fuel Tank with stopper for Gas fuel & fuel lines (Dubro 10 Oz Recommended)
- Zenoah RC Style Gas Engine
- Lightweight Metal Carb Arm (threaded for either 2mm or 3mm threaded ball)
You Can find it by contacting directly Mr Doug Darby on Facebook.
Without C/F Engine Cover, With C/F Engine Cover
Only logged in customers who have purchased this product may leave a review.
Categories: SYNERGY, Conversion kits Tags: conversion kit, g7z, gasser, n7, rc format, synergy, zenoah
Upper Frame [Left]
Upper Frame [Right]
Lower Frames [Pair]
SPECTER Gasser KIT [SPECTER 700 V2]
Amazing Design of a Gasser Conversion KIT for XL POWER – Specter 700 V2.
Next Production Batch on works..
N700X NITRO Standard UPGRADE KIT [TREX 700XN]
Up-Grade Conversion KIT for TREX 700XN Heli.
On Demand Production.
Air Filter [Gasser Engines]
High Performance Air Filter with Venturi & Malossi filter Foam.
Fits to any 30-60CC Gasser Engine.
G696Z Gasser Conversion KIT [SYNERGY 696]
Gasser Conversion KIT for SYNERGY 696 Heli.
On Demand Production – Customizations Available.
G700Z V2 Gasser Conversion KIT [TREX 700N]
Gasser Conversion KIT for the older models TREX 700N (61MM wide Frames)!
- ON DEMAND Production
T700XZ TURBINE Conversion KIT [TREX 700X/XN]
TURBINE Conversion KIT for TREX 700X & TREX 700XN Helis.
jyfly1 – :
The Synergy G7z is a fantastic heli. The conversion is very well done and everything lines up perfectly. The conversion is very solid and will hold up to hard 3d. I absolutely love this helicopter!!